
This unit is
a demodulating tool, designed for analysis of a signal, once detected
with any bug sweep unit or detector. The unit will enable you
to physicaly listen to the sound picked up from your bug detector
! The system will auto scan and lock on to signals in its area
and range, signals will then automatically be re modulated so
the user can physically hear the sounds being transmitted. The
unit is an excellent upgrade for any sweep unit that has no audio
deciphering system. It would make a good addition for a professional
or an amateur requiring clarification of signals.
SPECIFICATIONS
Frequency range: 30 MHz - 900 MHz (Cellular Blocked)
Modulation: FM
Deviation: < 100 KHz
Sensitivity: < -53 dBm at 500 MHz
Size: 100 mm high x 68 mm wide x 31 mm deep
Weight: 280 g
Impediance: 50 Ohms (BNC Socket)
Case: Stamped aluminum with black anodized finish
Battery: Internal 5 x AA 600 mAH NiCd pack
Power: 9 VDC 300 mA
FEATURES
Pocket size
Built-in speaker
Equipped with a 2.5 mm earphone mini jack
5 section RSSI bargraph to show relative RF signal strength
Incorporating an ICOM CI-V interface for tuning with the RW-00X
series
Enabling to hold on an active channel
Low battery indicator
Lock indicator to display signal reception
Low power consumption (Average 5 hour battery life)
Supplied with NiCd pack, AC wall charger, flexible antenna and
earphone
|